Hydraulic tower for wind turbine
Hydraulic tower for wind turbine generator
1. Tower height
Normal height is: 8m,9m,10m,12m,15m,16m, 20m for 2kw-20kw wind turbine generator
We can manufacture according to your request.
2. Material and antisepsis
manganese steel material. Hot galvanization, then coated or painted.
3. Guarantee
3 years
4. Package:
Tower: softpackage
Hydraulic system: plywood box or carton
5. Advantage
Easy installation, without crane. Small installation site area.
The whole set including tower, ground screw, cable, brakeing window and wire. For larger mode, we have working plateform, ladder to delivery with it.
Hydraulic towers, developed by SENWEI WIND POWER, are applied to wind turbine generators from 1kW to 50KW. Compared to the traditional guy cable tower, hydraulic tower enjoys the advantages of handsome exterior and taking small room (burdensome steel wires); Compared to the traditional tapered tower, the most outstanding merit for hydraulic tower is that wind turbine generator can be erected and laid down automatically through the appliance of hydraulic system to achieve installation and maintenance. So there is no need the cooperation of the crane, which will save the installation and maintenance cost to a great extent.
Composed by three sections of steel pipe with different diameters, the hydraulic towers are supplied by tower base, hypo-cylinder, and hydraulic pump. Flanges are welded to the both sides of each tower for connections. Tower base will be placed on the foundation.
Currently there are two models of hydraulic tower available, namely, manual hydraulic tower (8M) for 500W~2KW wind turbines and electric hydraulic tower (12M) for 3KW~10kw wind turbines,and (18m) for 20Kw-50Kw wind turbines.
Notes: 16M electric hydraulic tower is also available for 3KW~10KW.
Warnings
1> This guide has been carefully checked by engineers of SENWEI Energy Technology Co,.
2>Please forgive from specification alterations without notice.
3> It is required to comply with the local law, regulation or the permission from local government before installing WTGS.
4> only under no wind weather should proceed with the installation, maintenance and dismantling of WTGS.
5>Color or figuration of pictures might be varied against physical goods.
6>Project of tower installation should be carried out by professional builder. Please pay attention to safety during installation.
7> Please do not dismantle the inner structure of wind turbines until get any instructions from us. Any personal actions without our hints to dismantle should be excluded from the rights of warranty.
