guy wire tower for wind turbine 5.5m-30m
Guy wire tower for wind turbine generato
1. Tower height
Normal height is: 5.5m,6m,7m,8m,9m,10m,12m,15m,18m,25m,27m,30m for 300w-5kw wind turbine generator
We can manufacture according to your request or wind generator technical data.
2. Material and antisepsis
manganese steel material. Hot Al spray, then coated or painted.
3. Guarantee 3 years
4. Package: softpackage
5. Now we have new designed ground screw, it is easy to installation. For more details, pls contract with us.
The whole set including tower, ground screw, cable, guy wire..
For more details, pls contact with us.
A tower assembly system, a method for assembling the wind turbine tower and its wind turbine. Three or more guide devices can be installed to the mounting flange at the upper end of the lower tower part and/or the lower end of the upper tower part. The guide device includes a contact surface for contacting with the mating contact surface on the opposite tower part. The guide device includes a mounting flange, It is used to install the device on the mounting flange of the tower part with the fastening tool. This enables the guide device to grasp and guide the free-hanging tower part to the correct position on the fixed tower part. Compared with the existing assembly method, this reduces the assembly time by nearly 50%. The guide device enables workers to guide the free-hanging tower part to move from the ground to its position
The wind turbine tower bears various loads, such as static loads from the weight of the engine room and the tower itself, and dynamic loads caused by rotor thrust and approaching wind which is uneven in space and unstable in time. In addition, wind turbine towers with tall and thin structures are usually susceptible to vibration. Therefore, the resonance induced load caused by the excitation of the eigenfrequency close to the tower may play an important role.
